Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 


123 Street Avenue, City Town, 99999

(123) 555-6789


You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

FAQ Stone series

FAQ KABE Stone & KABE Stone Raw

Can oneself apply Stone products?

You do not need any crafts experience or advanced tools to apply KABE Stone and Stone Raw. The products are designed as a Do-It-Yourself product.The product consists solely of 1-component elements, that are ready to use. For larger areas, however, we recommend you to consult a professional. Please read the instructions before you start. For further information, please contact us through the contact form here.

How long time does it take to apply Stone products?

Due to the products’ required drying time you should set aside at least three days for the process. How long it takes an individual to do the different processes depends on experience and technique.

Where can Stone products be applied?

Stone and Stone Raw can be used on almost all surfaces outside wet zones. The Stone products are ideal for application on floors, furniture and walls exposed to extraordinary wear. You can up-cycle old furniture or build a new furniture based on your desired measurements. KABE Stone and KABE Stone Raw is also ideal for kitchen countertops and the wall behind a stove. 

Which surfaces can Stone products be applied on?

Stone and Stone Raw can be applied on most surfaces outside wet zones, as long as the surface is stable, even, dry and free of dust, oil or loose materials.

What if I want to apply Stone or Stone Raw on tiles, planks or other uneven or unstable surfaces?

As both Stone and Stone Raw is applied in very thin layers of approximately 0.5mm, it cannot be used for leveling. Therefore, the surface must be smoothened out and potentially stabilised before Stone products are applied. We recommend to consult a professional in order to prepare the surface correctly. If the product used for levelling very absorbent, a primer should be used before KABE Stone products are applied.

Can KABE Stone products be applied on floors with underfloor heating?

Yes, they can! It is important that the underfloor heating is switched off during application and hardening. Be sure to turn off the floor heating 2-3 days before start and keep  it off until 8 days after completed application. Turn it on gradually over 5-7 days.

What is the difference between Stone and Stone Raw?

The only difference between Stone and Stone Raw is the texture of the plaster. Stone Raw is a rougher plaster that makes it easier to create a lively and tactile finish. Stone Raw might be more convenient than Stone to apply because of its rough texture, making it easier to control when applying.

What is the difference between KABE and Stone/Stone Raw?

Both Stone products consist of a much harder material than KABE and is therefore suitable on vertical and horizontal surfaces which are exposed to high wear. For walls indoor that are not either in a wet zone or behind a stove, we recommend to apply KABE. On all other surfaces outside wet zones we recommend Stone or Stone Raw.

How can I buy Stone products?

KABE Stone and Stone Raw can be purchased from retailers in Denmark, Norway, Iceland, and the UK. Our retailers are ready to help with guidance on the process. Not all of our retailers offer KABE Stone. KABE Stone retailers are marked with a * on our website. For customers with residence in other countries please contact us through the contact form here in order to purchase our products.